跳到主要内容

CHANGELOG for Binance SPOT Testnet

Last Updated: 2026-04-28

Note: All features here will only apply to the SPOT Testnet. This is not always synced with the live exchange.

2026-04-28​

2026-04-17​

The following will occur today at approximately 10:00 UTC.

2026-04-16​

  • Updated the documentation to clarify that if a symbol has never had a reference price set, an error code -2043 is returned when querying the reference price. This applies to the following endpoint/method:
    • REST API: GET /api/v3/referencePrice
    • WebSocket API: referencePrice

2026-03-27​

The following will occur today at approximately 07:00 UTC.

  • RAW_REQUESTS rate limit increases to 300,000 per 5 minutes.

  • Request weights for the following endpoints and methods become 0 when the request is successful. Failed requests are still charged the documented weight.
    IPs that only call these endpoints and methods successfully will never hit the REQUEST_WEIGHT rate limit.

    • REST API
      • POST /api/v3/order
      • POST /api/v3/sor/order
      • DELETE /api/v3/order
      • DELETE /api/v3/openOrders
      • POST /api/v3/order/cancelReplace
      • POST /api/v3/order/oco
      • POST /api/v3/orderList/oco
      • POST /api/v3/orderList/oto
      • POST /api/v3/orderList/otoco
      • POST /api/v3/orderList/opo
      • POST /api/v3/orderList/opoco
      • DELETE /api/v3/orderList
      • PUT /api/v3/order/amend/keepPriority
    • WebSocket API
      • order.place
      • sor.order.place
      • order.cancel
      • openOrders.cancelAll
      • order.cancelReplace
      • orderList.place
      • orderList.place.oco
      • orderList.place.oto
      • orderList.place.otoco
      • orderList.place.opo
      • orderList.place.opoco
      • orderList.cancel
      • order.amend.keepPriority

  • STP Transfer will be allowed on all symbols today at approximately 07:00 UTC.

2026-03-16​

Notice: This will be rolled out at approximately 9:00 UTC today.

  • Symbols BTCUSDT and BROCCOLI714USDC have Price Range Execution Rule enabled. The settings are for testing only and may not be indicative of settings on the live exchange.

2026-03-12​

  • The removal of !ticker@arr for Spot Testnet has been moved to today at 07:30 UTC.

2026-03-11​

Notice: FIX TLS Connectivity Update on 2026-03-17, starting from 03:00 UTC and will take about 1 hour to complete.

Action Required:

During the update window, existing FIX connections may drop intermittently. To ensure successful reconnections and new connections afterward, please verify before our update that your client sends SNI (Server Name Indication) during the TLS handshake and validates the certificate against the requested hostname.
Clients without SNI may receive an error message during handshake related to incorrect certificate during or after the update window, leading to TLS handshake or hostname verification failures. This can occur with some Node.js clients if SNI is not explicitly configured.
Please consult the FIX API documentation for full context.

2026-03-09​

Notice: The changes in this section will be gradually rolled out starting from 2026-03-11 02:00 UTC and will be finished at approximately 2026-03-12 13:00 UTC.

New Features​

  • Price Range Execution Rule
    • New Endpoints/Methods
      • REST API:
        • GET /api/v3/executionRules
        • GET /api/v3/referencePrice
        • GET /api/v3/referencePrice/calculation
      • WebSocket API:
        • executionRules
        • referencePrice
        • referencePrice.calculation
    • New JSON Stream: <symbol>@referencePrice
  • REST and WebSocket API SBE schema 3:3
    • The current schema 3:2 spot_3_2.xml is deprecated and will be retired in 6 months as per our schema deprecation policy.
    • Changes in schema 3:3:
      • New message ExecutionRulesResponse
      • New message PriceRangeExecutionRule (to be embedded in ExecutionRulesResponse)
      • New message ReferencePriceResponse
      • New message ReferencePriceCalculationResponse
      • New enum executionRuleType
      • New enum expiryReason
      • New enum calculationType
      • New field expiryReason in NewOrderResultResponse, NewOrderFullResponse, NewOrderListResultResponse and NewOrderListFullResponse
      • New field expiryReason in ExecutionReportEvent
      • New message ServerShutdownEvent for WebSocket API only
  • FIX SBE schema 1:1
    • This will be used for FIX Order Entry, FIX Drop Copy, and FIX Market Data.
    • The current FIX schema 1:0 spot-fixsbe-1_0.xml is deprecated and will be retired in 6 months as per our schema deprecation policy.
    • Changes in schema 1:1:
      • New enum expiryReason
      • New field ExpiryReason in ExecutionReport

FIX API​

  • ExpiryReason <25056> is optionally added to the ExecutionReport <T> message.
    • Updated QuickFIX Schema for FIX Market Data and FIX Order Entry.

WebSocket API​

  • serverShutdown event added.

General Changes​

  • The responses to order placement and order list placement endpoints display the expiry reason depending on the value of newOrderRespAck:
    • If newOrderRespType=ACK, the expiry reason is not displayed.
    • If newOrderRespType=RESULT or newOrderRespType=FULL mode, the expiry reason, if any, is displayed in field expiryReason.
    • This affects the following endpoints/methods:
      • REST API
        • POST /api/v3/order
        • POST /api/v3/sor/order
        • POST /api/v3/order/cancelReplace
        • POST /api/v3/order/oco
        • POST /api/v3/orderList/oco
        • POST /api/v3/orderList/oto
        • POST /api/v3/orderList/otoco
        • POST /api/v3/orderList/opo
        • POST /api/v3/orderList/opoco
      • WebSocket API
        • order.place
        • sor.order.place
        • order.cancelReplace
        • orderList.place
        • orderList.place.oco
        • orderList.place.oto
        • orderList.place.otoco
        • orderList.place.opo
        • orderList.place.opoco
    • In User Data Streams, executionReport events have a new optional field, eR, which shows the expiry reason, if any.
  • These endpoints have been deprecated for a long time and will be retired:
    • GET /api/v1/ping
    • GET /api/v1/time
    • POST /api/v1/userDataStream
    • PUT /api/v1/userDataStream
    • GET /api/v1/ticker/bookTicker
    • GET /api/v1/ticker/price
    • GET /api/v1/klines
    • GET /api/v1/historicalTrades
    • GET /api/v1/depth
    • GET /api/v1/aggTrades
    • GET /api/v1/ticker/24hr
  • The following endpoints will be retired:
    • GET /api/v1/userDataStream
    • DELETE /api/v1/userDataStream
    • GET /api/v1/trades

2026-03-05​

New Features​

  • Users of the Spot Test Network can now choose to add commissions on their Testnet orders, if they want to test their integration of commission APIs and fields.

2026-02-24​

  • Following the announcement on 2025-11-28, !ticker@arr will be retired on 2026-03-26
  • ICEBERG_PARTS will be increased to 100 for all symbols starting 07:30 UTC.

2026-02-09​

2026-02-04​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. See F.A.Q. for more details.

REST and WebSocket API:

2026-02-02​

  • Documented that FIX Drop Copy session data is delayed by 1 second. This has been the delay since the inception of the FIX API.

2026-01-27​

2026-01-26​

  • Added undocumented recvWindow to userDataStream.subscribe.signature.

2026-01-21​

REST and WebSocket API​

Following the announcement from 2025-10-24, the following endpoints/methods will no longer be available starting from 2026-02-04, 07:00 UTC

REST API

  • POST /api/v3/userDataStream
  • PUT /api/v3/userDataStream
  • DELETE /api/v3/userDataStream

WebSocket API

  • userDataStream.start
  • userDataStream.ping
  • userDataStream.stop

2026-01-07​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. See F.A.Q. for more details.

2025-12-18​

  • Updated FIX SBE documentation
  • Clarified User Data Stream documentation regarding eventStreamTerminated.
  • Assets 这是测试币 and 456 and symbol 这是测试币456 have been added for testing endpoints/methods with a Unicode symbol. Balances for both assets have been distributed to all accounts.

2025-12-17​

REST API​

WebSocket API​

2025-12-15​

Clarification Regarding UTF-8 Encoding:

  • In FIX, REST, and WebSocket APIs, if your request contains a symbol name containing non-ASCII characters, then the response may contain non-ASCII characters encoded in UTF-8.
  • In REST and WebSocket APIs, some endpoints/methods may return asset and/or symbol names containing non-ASCII characters encoded in UTF-8 even if the request did not contain non-ASCII characters.
  • In WebSocket Streams, if your request contains a symbol name containing non-ASCII characters, then the stream events may contain non-ASCII characters encoded in UTF-8.
  • In WebSocket Streams, All Market Mini Tickers Stream and All Market Rolling Window Statistics Streams events may contain non-ASCII characters encoded in UTF-8.
  • In SBE Market Data Streams, if your request contains a symbol name containing non-ASCII characters, then the stream events may contain non-ASCII characters encoded in UTF-8.
  • UserDataStream events may contain non-ASCII characters encoded in UTF-8 if you own or trade any assets or symbols whose names contain non-ASCII characters.
  • For full compatibility with Binance APIs, please ensure your code is designed to handle UTF-8-encoded strings.

2025-12-09​

  • Schema for FIX SBE has been updated to use smallGroupSize16Encoding in MarketDataSnapshot and use presence="optional" for incremental book ticker/depth MDEntrySize fields.
  • Updated documentation re: FIX vs FIX SBE
  • Added documentation in REST, and WebSocket APIs stating:
    Please avoid SQL keywords in requests as they may trigger a security block by a WAF (Web Application Firewall) rule.
    See https://www.binance.com/en/support/faq/detail/360004492232 for more details.

2025-12-04​

2025-11-28​

Notice: The following changes will be deployed starting from 2025-12-01 2:00 UTC and may take several hours to complete

General Changes​

  • Parameter symbol and symbols can now support Unicode values encoded in UTF-8.
  • Following the announcement from 2025-11-14, all documentation related to !ticker@arr has been removed.
    • The feature will remain available until a future retirement announcement is made.
    • Please use <symbol>@ticker or !miniTicker@arr instead.

FIX API​

  • Unicode values encoded in UTF-8 can now be accepted in FIX messages. This is allowed for the following tags only:
    • Currency (15)
    • MiscFeeCurr (138)
    • Symbol (55)
    • SecondarySymbol (25019)
    • CounterSymbol (25028)
    • SecurityDesc (107)
  • When Unicode is put in a tag value that is not one of the tags above, FIX API will now send back a RefTagID (371) tag in the Reject <3>, pointing to exactly which tag is not allowed to contain Unicode.
  • NewOrderList <E> accepts TriggerPriceDirection (1109) without TriggerPrice (1102).

WebSocket Streams​

  • WebSocket Market Streams supports URL-encoded urls.

Notice: The following changes will occur at approximately 2025-12-02 11:00 UTC:

  • FIX SBE support becomes available.
  • One Pays the Other (OPO) becomes available on all symbols.
    • opoAllowed begins to appear in Exchange Information requests, indicating if One-Pays-the-Other (OPO) orders are supported on each symbol.
      • REST API: GET /api/v3/exchangeInfo
      • WebSocket API: exchangeInfo
    • New requests for OPO:
      • REST API:
        • POST /api/v3/orderList/opo
        • POST /api/v3/orderList/opoco
      • WebSocket API
        • orderList.place.opo
        • orderList.place.opoco
      • FIX API
        • NewOrderList <E> has field OPO (25046). Please update to the latest QuickFIX Schema for OPO support.
  • STP mode TRANSFER has been added. The exact date that STP TRANSFER will be enabled has not yet been determined.
  • SBE: A new schema 3:2 (spot_3_2.xml) is available.
    • The current schema 3:1 (spot_3_1.xml) is deprecated and will be retired in 6 months as per our schema deprecation policy.
    • Changes in 3:2:
      • New enum variant TRANSFER for selfTradePreventionMode and allowedSelfTradePreventionModes.
      • All schemas below 3:1 are unable to represent any response that could contain the STP mode TRANSFER (e.g. Exchange Information, order placement, order cancellation, or querying the status of an order).
        When a response cannot be represented in the requested schema, an error is returned.
  • FIX API changes:
    • LastFragment (893) becomes deprecated.
      • This means that the MarketIncrementalRefresh <X> messages will no longer be fragmented and may contain more than 10,000 entries.
      • The documentation has been updated to reflect this change.
    • ListStatus <N> will no longer emit the optional symbol field.
      • This applies to FIX Order Entry and FIX Drop Copy.
      • The documentation has been updated to reflect this change.

2025-11-25​

2025-11-14​

  • All Market Tickers Stream (!ticker@arr) has been deprecated; This means this will be removed both from the documentation and from our systems at a later date. More details to follow.
  • Please use <symbol>@ticker or !miniTicker@arr instead.

2025-11-12​

2025-11-11​

SBE Market Data​

  • At 2025-11-11 07:00 UTC, the update speed of <symbol>@depth and <symbol>@depth20 streams will be changed to 50ms.
    • This change will apply automatically to all users of SBE Market Data and doesn't require any action.
    • The total amount of data received per second will be increased (up to 2x).
    • These new update speeds will take effect on the live exchange at 2025-11-26 07:00 UTC.
    • SBE Market Data has been updated to reflect these changes.

2025-11-10​

  • "Last Updated" dates will be removed from all documents except for CHANGELOG.
  • Moving forward, CHANGELOG will be the source of reference for when changes were made to any document.

2025-11-05​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. See F.A.Q. for more details.

2025-10-24​

SBE​

REST and WebSocket API​

Following the announcement from 2025-04-01, all documentation related with listenKey for use on wss://stream.binance.com has been removed.

Please refer to the list of requests and methods below for more information.

The features will remain available until a future retirement announcement is made.

REST API

  • POST /api/v3/userDataStream
  • PUT /api/v3/userDataStream
  • DELETE /api/v3/userDataStream

WebSocket API

  • userDataStream.start
  • userDataStream.ping
  • userDataStream.stop

2025-10-17​

Notice: The following changes will be enabled at 2025-10-17 07:00 UTC

  • An optional parameter, symbolStatus, has been added to the following endpoints:
    • REST API
      • GET /api/v3/depth
      • GET /api/v3/ticker/price
      • GET /api/v3/ticker/bookTicker
      • GET /api/v3/ticker/24hr
      • GET /api/v3/ticker/tradingDay
      • GET /api/v3/ticker
    • WebSocket API
      • depth
      • ticker.price
      • ticker.book
      • ticker.24hr
      • ticker.tradingDay
      • ticker
  • When the parameter symbolStatus=<STATUS> is provided, only symbols whose trading status matches the specified STATUS will be included in the response:
    • If a single symbol is specified using the symbol=<SYMBOL> parameter and its trading status does not match the given STATUS, the endpoint will return error code -1220 SYMBOL_DOES_NOT_MATCH_STATUS.
    • If multiple symbols are specified using the symbols=[...] parameter, the response will be an array that excludes any symbols whose trading status does not match STATUS. If no symbols from the symbols parameter have a trading status that matches STATUS, the response is an empty array.
    • For endpoints where the symbol and symbols parameters are optional, omitting these parameters is treated as if all symbols had been specified in the symbols=[...] parameter. See the previous line for the behavior of symbolStatus=<STATUS>.

2025-10-08​

FIX API​

Notice: The following changes will be enabled at 2025-10-08 07:00 UTC

  • Updated QuickFIX Schema for FIX Market Data:
    • Updated RecvWindow (25000) to reflect microsecond support announced on 2025-08-05.
    • Updated InstrumentList <y> message:
      • Added fields: StartPriceRange, EndPriceRange.
      • Made the following fields optional: MinTradeVol, MaxTradeVol, MinQtyIncrement, MarketMinTradeVol, MarketMaxTradeVol, MarketMinQtyIncrement, MinPriceIncrement.
    • The changes to InstrumentList <y> are breaking changes. Please update to the new schema.

2025-10-01​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. See F.A.Q. for more details.

REST and WebSocket API:

2025-09-24​

Notice: The following changes will be deployed on 2025-09-24, starting at 7:00 UTC and may take several hours to complete.

  • Added an endpoint to retrieve the list of filters relevant to an account on a given symbol. This is the only endpoint that shows if an account has MAX_ASSET filters applied to it.
  • Comments in SBE: schema 3:1 (spot_3_1.xml) have been added, modified, and removed. Although there is no need for users of 3:1 to update to this version of the file, we advise updating to maintain consistency.
  • Added documentation for filter MAX_ASSET.
    • In Testnet only: all accounts have a MAX_ASSET filter for asset JPY with value set to 1000000.

2025-09-18​

2025-09-12​

2025-09-05​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. See F.A.Q. for more details.

2025-08-28​

  • Updated SBE FAQ section regarding legacy support to include more details on schema compatibility and explain NonRepresentable and NonRepresentableMessage.

2025-08-26​

2025-08-25​

  • SBE: schema 3:1 (spot_3_1.xml) will be updated on 2025-08-25 at 05:00 UTC
    • The following fields have been renamed because the SbeTool code generator has been found to generate Java code that does not compile.
      • Although only users impacted by this issue need to update the schema, we advise all users to upgrade to the latest version to maintain consistency.
      • Message MaxAssetFilter
        • field limitExponent renamed to qtyExponent
        • field limit renamed to maxQty

2025-08-19​

  • userDataStream.subscribe returns subscriptionId in the responses.
    This was missed in a previous changelog entry.

2025-08-07​

Notice: The following will be enabled on 2025-08-08, 07:00 UTC

2025-08-05​

Notice: The following changes will be deployed on 2025-08-06, starting 7:00 UTC and may take several hours to complete.
Please consult the Spot Test Network's homepage to be informed of the release completion.

General Changes​

  • The pegged order functionality is now available.
    • Exchange Information requests emit the field pegInstructionsAllowed.
    • The following conditional fields pegPriceType, pegOffSetType, pegOffsetValues, and peggedPrice appear in responses of the following requests if the order was a pegged order:
      • REST API
        • GET /api/v3/order
        • GET /api/v3/orderList
        • GET /api/v3/openOrderList
        • GET /api/v3/allOrders
        • DELETE /api/v3/order
        • DELETE /api/v3/orderList
        • DELETE /api/v3/openOrders
        • PUT /api/v3/order/amend/keepPriority
      • WebSocket API
        • order.status
        • orderList.status
        • allOrders
        • order.cancel
        • orderList.cancel
        • openOrders.cancelAll
        • order.amend.keepPriority
    • FIX API
      • OrdType(4) supports new value P(PEGGED)
      • Tags PegOffsetValue(211), PegPriceType(1094), PegMoveType(835), and PegOffsetType(836) have been added to the following messages:
        • NewOrderSingle <D>
        • NewOrderList <E>
        • OrderCancelRequestAndNewOrderSingle <XCN>
        • When placing an order, the ExecutionReport <8> message will echo back PegInstructions, with an extra optional field PeggedPrice (839).
    • New error messages for pegged orders are added. Please see the Errors document for more information.
  • Changes with recvWindow:
    • A third check is made after your message leaves the message broker just before it is sent to the Matching Engine.
      • This does not cover potential delays inside the Matching Engine itself.
    • recvWindow supports microseconds.
      • The value is still specified in milliseconds, but can now take a decimal component to specify it with higher precision.
      • This means that the parameter supports a maximum precision of 3 decimal places. (e.g. 6000.346)
      • APIs affected:
        • FIX API
        • REST API
        • WebSocket API
  • The following requests have a new structure called specialCommission. See Commission Rates.
    • REST API
      • GET /api/v3/account/commission
      • POST /api/v3/order/test with computeCommissionRates=true
      • POST /api/v3/sor/order/test with computeCommissionRates=true
    • WebSocket API
      • account.commission
      • order.test with computeCommissionRates=true
      • sor.order.test with computeCommissionRates=true
  • The new MAX_NUM_ORDER_AMENDS filter is enabled with a limit of 10 amendments per order.
  • New error codes -1120 and 1211. See Errors for more information.
  • SBE: A new schema 3:1 (spot_3_1.xml) is available.
    • The current schema 3:0 (spot_3_0.xml) is deprecated and will be retired in 6 months as per our schema deprecation policy.
    • Changes in schema 3:1:
      • ExchangeInfoResponse: new field pegInstructionsAllowed
      • ExecutionReportEvent: new fields pricePeg, pricePegOffsetLevel, peggedPrice
      • UserDataStreamSubscribeResponse: new field subscriptionId
      • New field subscriptionId for all user data stream events.
      • Field apiKey renamed to loggedOnApiKey for WebSocketSessionLogonResponse, WebSocketSessionStatusResponse and WebSocketSessionLogoutResponse
      • OrderTestWithCommissionsResponse: 2 new fields specialCommissionForOrderMaker and specialCommissionForOrderTaker
      • AccountCommissionResponse: 4 new fields specialCommissionMaker, specialCommissionTaker, specialCommissionBuyer and specialCommissionSeller
      • Support for EXCHANGE_MAX_NUM_ORDER_LISTS, MAX_NUM_ORDER_LISTS, and MAX_NUM_ORDER_AMENDS filters.
      • ExecutionReportEvent: fields rejectReason and origClientOrderId now show their default values in SBE format to match the JSON format.
      • NonRepresentableMessage: New message added to represent a message that cannot be represented in this schema ID and version. Receipt of this message indicates that something should be available, but it is not representable using the SBE schema currently in use.
  • Query order lists requests will first query the data in the cache, and if it cannot be found will query the database.
    • REST API: GET /api/v3/openOrderLists
    • WebSocket API: openOrderLists.status
  • Orders with cumulative quantity of 0 in the final state EXPIRED_IN_MATCH (i.e. the order expired due to STP) will be archived after 90 days.
  • Bug fix: The Matching Engine no longer accepts order lists that exceed the order count filter limits. Affected filters:
    • MAX_NUM_ORDERS
    • MAX_ALGO_ORDERS
    • MAX_ICEBERG_ORDERS
    • EXCHANGE_MAX_NUM_ORDERS
    • EXCHANGE_MAX_ALGO_ORDERS
    • EXCHANGE_MAX_ICEBERG_ORDERS

WebSocket API​

  • A single WebSocket connection can subscribe to multiple User Data Streams at once.
    • Only one subscription per account is allowed on a single connection.
  • Method userDataStream.subscribe.signature has been added that allows you to subscribe to the User Data Stream without needing to login first.
    • This also doesn’t require an Ed25519 API Key, and can work with any API Key type.
    • For SBE support you need to use schema 3:1 at least.
  • Method session.subscriptions has been added that lists all the subscriptions active for the current session.
  • The meaning of the field userDataStream in the session requests has changed slightly.
    • Previously, this returned true if you were subscribed to the user data stream of your logged-on account.
    • Now it returns true if you have at least one active user data stream subscription
      • true - If there is at least one subscription active
      • false - If there are no active subscriptions
  • userDataStream.unsubscribe supports closing multiple subscriptions.
    • When called with no parameter, this will close all subscriptions.
    • When called with subscriptionId, this will attempt to close the subscription matching that Id, if it exists.
    • The authorization for this request has been changed to NONE.

User Data Stream​

  • Field subscriptionId has been added to the User Data Stream events payload when listening through the WebSocket API. This will identify which subscription the event is coming from.

FIX API​

  • When a client sends a reject message, the FIX API will no longer send the client back a Reject <3> message. Error messages are clearer when a tag is invalid, missing a value, or when the field value is empty or malformed
    • If the tag number was invalid, you will receive the error: 
      { "code": -1169, "msg": "Invalid tag number." }
    • If a valid tag was specified without a value, you will receive the error: 
      { "code": -1177, "msg": "Tag specified without a value." }
    • If the field value was empty or malformed, you will still receive the error: 
      { "code": -1102, "msg": "Field value was empty or malformed." }

2025-07-02​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. (see F.A.Q. for more details)

2025-06-04​

Data reset

All data on the Spot Test Network will be deleted today according to the periodic reset procedure. (see F.A.Q. for more details)

2025-05-28​

  • Documented API timeout value and error under General API Information for each API:

2025-05-22​

REST and WebSocket API:

2025-05-21​

Notice: The following changes will happen at 2025-05-21 7:00 UTC.

  • The previous behavior of recvWindow on FIX, REST, and WebSocket APIs will be augmented by an additional check.
    • To review, the existing behavior is:
      • If timestamp is greater than serverTime + 1 second at receipt of the request, the request is rejected. Rejection by this check increments message limits (FIX API) and IP limits (REST and WebSocket APIs), but not Unfilled Order Count (order placement endpoints of all APIs).
      • If the difference between timestamp and serverTime at receipt of the request is greater than recvWindow, the request is rejected. Rejection by this check increments message limits (FIX API) and IP limits (REST and WebSocket APIs) but not Unfilled Order Count (order placement endpoints of all APIs).
    • The additional check is:
      • Just before a request is forwarded to the Matching Engine, if the difference between timestamp and the current serverTime is greater than recvWindow, the request is rejected. Rejection by this check increments message limits (FIX API), IP limits (REST and WebSocket APIs), and Unfilled Order Count (order placement endpoints of all APIs).
    • The documentation for Timing security has been updated to reflect the additional check.
  • Fixed a bug in FIX Market Data message InstrumentList <y>. Previously, the value of NoRelatedSym(146) could have been incorrect.

2025-04-29​

  • Features that currently require an Ed25519 API key will soon be opened up to HMAC and RSA keys.
    • For example, subscribing to User Data Stream in WebSocket API will be possible with any API key type before listenKeys are removed.
    • Users are still encouraged to migrate to Ed25519 API keys as they are more secure and performant on Binance Spot Trading.
    • More details to come.

2025-04-25​

  • Notice: The following changes will happen at 2025-04-25 09:00 UTC.
  • The following request weights will be increased from 1 to 4:
    • REST API: PUT /api/v3/order/amend/keepPriority
    • WebSocket API: order.amend.keepPriority
    • The documentation for both REST and WebSocket API has been updated to reflect the upcoming changes.
  • Clarified that SEQNUM in the FIX-API is a 32-bit unsigned integer that rolls over. This has been the SEQNUM data type since the inception of the FIX-API.

2025-04-21​

2025-04-01​

Notice: The following changes will be deployed tomorrow April 2, 2025 starting at 7:00 UTC and may take several hours to complete.
Please consult the Spot Test Network's homepage to be informed of the release completion.

New Features​

  • Order Amend Keep Priority is now available.
    • FIX API: New Order Entry Messages OrderAmendKeepPriorityRequest and OrderAmendReject
    • REST API: PUT /api/v3/order/amend/keepPriority
    • WebSocket API: order.amend.keepPriority
    • You can check the new allowAmend field in Exchange Information Requests to see if it's enabled on a given symbol:
      • REST API: GET /api/v3/exchangeInfo
      • WebSocket API: exchangeInfo
  • Self-trade prevention mode DECREMENT is now available.
    • Instead of expiring one or both orders, DECREMENT mode decreases the available quantity of both orders by increasing the prevented quantity of both orders by the amount of the prevented match.
    • This can expire the orders if their filled quantity + prevented quantity >= order quantity.
    • You can check the allowedSelfTradePreventionModes field in Exchange Information Requests to see if this mode is enabled on a given symbol.

General Changes​

  • Important: The following legacy URLs will be removed in May 2025. Please change to the new URLs as soon as possible:
Legacy URLLatest URL
wss://testnet.binance.vision/ws-api/v3wss://ws-api.testnet.binance.vision/ws-api/v3
wss://testnet.binance.vision/wswss://stream.testnet.binance.vision/ws
  • Behavior when querying and/or canceling with orderId and origClientOrderId/cancelOrigClientOrderId:
    • The behavior when both parameters were provided was not consistent across all endpoints.
    • Moving forward, when both parameters are provided, the order is first searched for using its orderId, and if found, origClientOrderId/cancelOrigClientOrderId is checked against that order. If both conditions pass, the request succeeds. If both conditions are not met the request is rejected.
    • Affected requests:
      • REST API:
        • GET /api/v3/order
        • DELETE /api/v3/order
        • POST /api/v3/order/cancelReplace
      • WebSocket API:
        • order.status
        • order.cancel
        • order.cancelReplace
      • FIX API
        • OrderCancelRequest <F>
        • OrderCancelRequestAndNewOrderSingle <XCN>
  • Behavior when canceling with listOrderId and listClientOrderId:
    • The behavior when both parameters were provided was not consistent across all endpoints.
    • Moving forward, when both parameters are passed, the order list is first searched for using its listOrderId, and if found, listClientOrderId is checked against that order list. If both conditions are not met the request is rejected.
    • Affected requests:
      • REST API
        • DELETE /api/v3/orderList
      • WebSocket API
        • orderList.cancel
  • Previously, the request weight for myTrades was 20 regardless of the parameters provided. Now, if you provide orderId, the request weight is 5.
    • REST API: GET /api/v3/myTrades
    • WebSocket API: myTrades
  • If the unfilled order count for intervalNum:DAY is exceeded, the unfilled order count for intervalNum:SECOND is no longer incremented.
  • Change when querying and deleting orders:
    • When neither orderId nor origClientOrderId are present, the request is now rejected with -1102 instead of -1128.
    • Affected requests:
      • REST API:
        • GET /api/v3/order
        • DELETE /api/v3/order
      • WebSocket API
        • order.status
        • order.cancel
      • FIX API
        • OrderCancelRequest <F>
  • New Error code -2038 for order amend keep priority requests that fail.
  • New messages for error code -1034.

FIX API​

  • The QuickFix schema for FIX OE is updated to support the Order Amend Keep Priority feature and new STP mode, DECREMENT.
  • FIX Order Entry connection limits will be a maximum of 10 concurrent connections per account.
  • The connection rate limits are now enforced. Note that these limits are checked independently for both the account and the IP address.
    • FIX Order Entry: 15 connection attempts within 30 seconds
    • FIX Drop Copy: 15 connection attempts within 30 seconds
    • FIX Market Data: 300 connection attempts within 300 seconds
  • News <B> contains a countdown until disconnection in the Headline field.
    • Following the completion of this update, when the server enters maintenance, a News message will be sent to clients every 10 seconds for 10 minutes. After this period, clients will be logged out and their sessions will be closed.
  • OrderCancelRequest <F> and OrderCancelRequestAndNewOrderSingle <XCN> will now allow both orderId and clientOrderId.
  • FIX API verifies that EncryptMethod(98) is 0 at Logon <A>.

User Data Streams​

  • Receiving user data streams on stream.testnet.binance.vision using a listenKey is now deprecated.
    • This feature will be removed from our systems at a later date.
  • Instead, you should get user data updates by subscribing to the User Data Stream on the WebSocket API.
    • This should offer slightly better performance (lower latency).
    • This requires the use of an Ed25519 API Key.
  • In a future update, information about the base WebSocket endpoint for the User Data Streams will be removed.
  • In a future update, the following requests will be removed from the documentation:
    • POST /api/v3/userDataStream
    • PUT /api/v3/userDataStream
    • DELETE /api/v3/userDataStream
    • userDataStream.start
    • userDataStream.ping
    • userDataStream.stop
  • The User Data Stream documentation will remain as reference for the payloads you can receive.

SBE​

  • A new schema 3:0 (spot_3_0.xml) is now available.
    • The current schema 2:1 (spot_2_1.xml) is now deprecated and will be retired in 6 months as per our schema deprecation policy.
    • Note that trying to use schema 3:0 before it is released will result in an error.
  • Changes in schema 3:0:
    • Support for Order Amend Keep Priority:
      • Added field amendAllowed to ExchangeInfoResponse.
      • New Messages OrderAmendmentsResponse and OrderAmendKeepPriorityResponse
    • Breaking changes:
      • All enums now have a NON_REPRESENTABLE variant. This will be used to encode new enum values in the future, which would be incompatible with 3:0.
      • New enum variant DECREMENT for selfTradePreventionMode and allowedSelfTradePreventionModes
      • symbolStatus enum values AUCTION_MATCH, PRE_TRADING and POST_TRADING have been removed.
      • Fields usedSor, orderCapacity, workingFloor, preventedQuantity, and matchType are no longer optional.
      • Field orderCreationTime in ExecutionReportEvent is now optional.
  • When using deprecated schema 2:1 on the WebSocket API to listen to the User Data Stream:
    • ListStatusEvent field listStatusType will be rendered as ExecStarted when it should have been Updated. Upgrade to schema 3:0 to get the correct value.
    • ExecutionReportEvent field selfTradePreventionMode will be rendered as None when it should have been Decrement. This only happens when executionType is TradePrevention.
    • ExecutionReportEvent field orderCreationTime will be rendered as -1 when it has no value.
  • All schemas below 3:0 are unable to represent responses for Order Amend Keep Priority requests and any response that could contain the STP mode DECREMENT (e.g. Exchange Information, order placement, order cancelation, or querying the status of your order). When a response cannot be represented in the requested schema, an error is returned.

2025-03-31​

  • Added a clarification on the performance of canceling an order.

2025-03-13​

  • Notice: The following changes will happen on March 13,2025 at 05:00 UTC:
    • FIX Drop Copy sessions will have a limit of 60 messages per minute.
    • FIX Market Data sessions will have a limit of 2000 messages per minute.
    • The FIX API documentation has been updated to reflect the upcoming changes.

2025-03-05​

  • Notice: This is in the process of being deployed. Please consult the Spot Test Network's homepage to be informed of the release completion.
    The following request weights will be increased from 2 to 4:
    • REST API: GET /api/v3/aggTrade
    • WebSocket API: trades.aggregate
  • The documentation for both REST and WebSocket API has been updated to reflect the upcoming changes.

2025-02-28​

  • SBE Market Data Streams are now available. These streams offer a smaller payload and should offer better latency than the equivalent JSON streams for a subset of latency-sensitive market data streams.
  • Streams available in SBE format:
    • Real-time: trade stream
    • Real-time: best bid/ask
    • Every 100 ms: diff. depth
    • Every 100 ms: partial book depth
  • For more information please refer to the SBE Market Data Streams.

2025-02-05​

  • Notice: These changes will be deployed starting at 7:00 UTC, and may take several hours to complete. The following changes will apply to WebSocket Market Data Streams, User Data Streams, and the WebSocket API:
    • Our WebSocket services will send a ping frame every 20 seconds instead of 3 minutes.
    • The allowed pong delay will be 1 minute instead of 10 minutes.
    • The documentation for these services have been updated to reflect the change.
  • AggressorSide (2446) is now rendered in the FIX Market Data Trade Stream. The QuickFIX schema file has also been updated. Please download the latest schema before the Spot Testnet upgrade is completed.

2024-12-17​

  • FIX Market Data is now available. The FIX API documentation for SPOT Testnet has been updated regarding this feature.
  • Please refer to this link for the QuickFIX Schema for FIX Market Data.

2024-11-27​

Note: These changes will be deployed live starting 2024-11-28 and may take several hours for all features to work as intended.

New Feature: Microsecond support:

The system now supports microseconds in all related time and/or timestamp fields. Microsecond support is opt-in, by default the requests and responses still use milliseconds.

Examples in documentation are also using milliseconds for the foreseeable future.

WebSocket Streams

  • A new optional parameter timeUnit can be used in the connection URL to select the time unit.
    • For example: /stream?streams=btcusdt@trade&timeUnit=millisecond
    • Supported values are:
      • MILLISECOND
      • millisecond
      • MICROSECOND
      • microsecond
    • If the time unit is not selected, milliseconds will be used by default.

REST API

  • A new optional header X-MBX-TIME-UNIT can be sent in the request to select the time unit.
    • Supported values:
      • MILLISECOND
      • millisecond
      • MICROSECOND
      • microsecond
    • The time unit affects time-related parameters in requests (e.g, startTime, endTime, timestamp).
    • The time unit affects timestamp fields in responses (e.g., time, transactTime).
    • If the time unit is not selected, milliseconds will be used by default.

WebSocket API

  • A new optional parameter timeUnit can be used in the connection URL to select the time unit.
    • Supported values:
      • MILLISECOND
      • millisecond
      • MICROSECOND
      • microsecond
    • The time unit affects time-related parameters in requests (e.g, startTime, endTime, timestamp).
    • The time unit affects timestamp fields in responses (e.g., time, transactTime).
    • If the time unit is not selected, milliseconds will be used by default.

User Data Streams

  • A new optional parameter timeUnit can be used in the connection URL to select the time unit.
    • Supported values
      • MILLISECOND
      • MICROSECOND.
      • microsecond
      • millisecond

General Changes:

  • Fixed a bug that prevented orders from being placed when submitting OCOs on the BUY side without providing a stopPrice.

  • TAKE_PROFIT and TAKE_PROFIT_LIMIT support has been added for OCOs.

    • Previously OCOs could only be composed by the following order types:
      • LIMIT_MAKER + STOP_LOSS
      • LIMIT_MAKER + STOP_LOSS_LIMIT
    • Now OCOs can be composed of the following order types:
      • LIMIT_MAKER + STOP_LOSS
      • LIMIT_MAKER + STOP_LOSS_LIMIT
      • TAKE_PROFIT + STOP_LOSS
      • TAKE_PROFIT + STOP_LOSS_LIMIT
      • TAKE_PROFIT_LIMIT + STOP_LOSS
      • TAKE_PROFIT_LIMIT + STOP_LOSS_LIMIT
    • This is supported by the following requests:
      • POST /api/v3/orderList/oco
      • POST /api/v3/orderList/otoco
      • orderList.place.oco
      • orderList.place.otoco
      • NewOrderList<E>
    • Error code -1167 will be obsolete after this update and will be removed from the documentation in a later update.

  • Timestamp parameters now reject values too far into the past or the future. To be specific, the parameter will be rejected if:

    • timestamp before 2017-01-01 (less than 1483228800000)
    • timestamp is more than 10 seconds after the current time (e.g., if current time is 1729745280000 then it is an error to use 1729745291000 or greater)

  • If startTime and/or endTime values are outside of range, the values will be adjusted to fit the correct range.

  • The field for quote order quantity (origQuoteOrderQty) has been added to responses that previously did not have it. Note that for order placement endpoints the field will only appear for requests with newOrderRespType set to RESULT or FULL.

    • Please refer to the table for requests with origQuoteOrderQty:
    ServiceRequest
    RESTPOST /api/v3/order
    POST /api/v3/sor/order
    POST /api/v3/order/oco
    POST /api/v3/orderList/oco
    POST /api/v3/orderList/oto
    POST /api/v3/orderList/otoco
    DELETE /api/v3/order
    DELETE /api/v3/orderList
    POST /api/v3/order/cancelReplace
    WebSocket APIorder.place
    sor.order.place
    orderList.place
    orderList.place.oco
    orderList.place.oto
    orderList.place.otoco
    order.cancel
    orderList.cancel
    order.cancelReplace

SBE

  • A new schema 2:1 spot_2_1.xml has been released. The current schema 2:0 spot_2_0.xml will thus be deprecated, and retired from the API in 6 months as per our schema deprecation policy.
  • Schema 2:1 is a backward compatible update of schema 2:0. You will always receive payloads in 2:1 format when you request either schema 2:0 or 2:1.
  • Changes in SBE schema 2:1:
    • New field origQuoteOrderQty in order placement/cancellation responses (Note: Decoders generated using the 2:0 schema will skip this field.):
      • NewOrderResultResponse
      • NewOrderFullResponse
      • CancelOrderResponse
      • NewOrderListResultResponse
      • NewOrderListFullResponse
      • CancelOrderListResponse
    • WebSocket API only: New field userDataStream in session status responses:
      • WebSocketSessionLogonResponse
      • WebSocketSessionStatusResponse
      • WebSocketSessionLogoutResponse
    • WebSocket API only: New messages for User Data Stream support:
      • UserDataStreamSubscribeResponse
      • UserDataStreamUnsubscribeResponse
      • BalanceUpdateEvent
      • EventStreamTerminatedEvent
      • ExecutionReportEvent
      • ExternalLockUpdateEvent
      • ListStatusEvent
      • OutboundAccountPositionEvent

WebSocket API

  • You can now subscribe to User Data Stream events through your WebSocket API connection.
    • Note: This feature is only available for users of Ed25519 API keys.
    • Note: New SBE schema 2:1 is required for User Data Stream subscriptions in SBE format.
  • New requests:
    • userDataStream.subscribe
    • userDataStream.unsubscribe
  • Changes to session.logon, session.status, and session.logout
    • Added a new field userDataStream indicating if the user data stream subscription is active.
  • Fixed a bug where you wouldn't receive a new listenKey using userDataStream.start after session.logon

User Data Stream

  • WebSocket API only: New event eventStreamTerminated is emitted when you either logout from your websocket session or you have unsubscribed from the user data stream.
  • New event externalLockUpdate is sent when your spot wallet balance is locked/unlocked by an external system.

FIX API

  • The schema has been updated with a new Administrative message News <B>, which can be used for all FIX services. Receiving this message indicates that your connection is about to be closed.
  • Note: This message will be available in the live exchange at a later date.

2024-11-05​

Note: This is in the process of being deployed. Please consult the Spot Test Network's homepage to be informed of the release completion.

Changes to Exchange Information (i.e. GET /api/v3/exchangeInfo from REST and exchangeInfo for WebSocket API).

  • A new optional parameter showPermissionSets can be used to hide the permissions from permissionsSets; This can be used for a reduced payload size.
  • A new optional parameter symbolStatus can now be used to only show symbols with the specified status. (e.g. TRADING, HALT, BREAK)

2024-10-02​

REST and WebSocket API:

2024-09-04​

  • Spot Testnet now supports Unfilled Order Count. Please refer to this page on how you can decrement your unfilled order count when placing orders.
  • The documentation has been updated to reflect the wording.

2024-08-16​

General Changes:

  • New error messages have been added when quote quantity market orders (aka reverse market orders) are rejected in low-liquidity situations.

2024-08-07​

2024-07-23​

Note: This will be deployed starting around 7am UTC. Please consult the Spot Test Network's homepage to be informed of the release completion.

  • FIX Drop Copy sessions are now supported on the Spot Test Network.
  • New API Key permission FIX_API_READ_ONLY has been introduced.

2024-07-17​

General changes:

  • Fixed a bug where klines had incorrect timestamps.
    • REST API: GET /api/v3/klines and GET /api/v3/uiKlines with timeZone parameter
    • WebSocket API: klines and uiKlines with timeZone parameter
    • WebSocket Streams: <symbol>@kline_<interval>@+08:00 streams

2024-06-21​

  • FIX API will be available today (2024-06-21) on the Spot Test Network. Please consult the Spot Test Network's homepage to be informed of the release completion.
    • Using the FIX API requires an Ed25519 API Key with the FIX_API permission.
    • The release date on the live exchange has not been determined.

2024-06-05​

WebSocket Streams

  • Buyer order ID (b) and Seller order ID (a) have been removed from the Trade streams. (i.e. <symbol>@trade)
  • To monitor if your order was part of a trade, please listen to the User Data Streams.

2024-05-30​

WebSocket API

  • wss://ws-api.testnet.binance.vision/ws-api/v3 is now the primary URL for the Spot Testnet WebSocket API. Other URLs will be phased out over time.

WebSocket Streams

  • wss://stream.testnet.binance.vision/ws and wss://stream.testnet.binance.vision/stream are now the primary URLs for the Spot Testnet WebSocket Streams. Other URLs will be phased out over time.

2024-05-23​

REST API

  • orderRateLimitExceededMode has been added to POST /api/v3/order/cancelReplace

WebSocket API

  • orderRateLimitExceededMode has been added to order.cancelReplace

WebSocket Streams

  • Kline/Candlestick streams can now support a UTC+8:00 timezone offset. (e.g. btcusdt@kline_1d@+08:00)

2024-05-02​

  • One-Triggers-the-Other (OTO) orders and One-Triggers-a-One-Cancels-The-Other (OTOCO) orders are now enabled.
  • New requests have been added:
    • REST API:
      • POST /api/v3/orderList/oto
      • POST /api/v3/orderList/otoco
    • WebSocket API:
      • orderList.place.oto
      • orderList.place.otoco

2024-04-04​

General changes:

  • Symbol permission information in Exchange Information responses has moved from field permissions to field permissionSets.
  • Field permissions will be empty and will be removed in a future release.
  • Previously, "permissions":["SPOT","MARGIN"] meant that you could place an order on the symbol if your account had SPOT or MARGIN permissions. The equivalent is "permissionSets":[["SPOT","MARGIN"]]. (Note the extra set of square brackets.) Each array of permissions inside the permissionSets array is called a "permission set".
  • Symbol permissions can now be more complex. "permissionSets":[["SPOT","MARGIN"],["TRD_GRP_004","TRD_GRP_005"]] means that you may place an order on the symbol if your account has SPOT or MARGIN permissions and TRD_GRP_004 or TRD_GRP_005 permissions. There may be an arbitrary number of permission sets in a symbol's permissionSets.
  • The weight of the following requests has increased from 10 to 25:
    • GET /api/v3/trades
    • GET /api/v3/historicalTrades
    • trades.recent
    • trades.historical

REST API

  • The POST /api/v3/order/oco endpoint is now deprecated on the REST API. You should use the new POST /api/v3/orderList/oco endpoint instead. Note that this new endpoint uses different parameters.
  • POST /api/v3/order/oco has been removed from the Rest API documentation for SPOT Testnet.
  • otoAllowed will now appear on GET /api/v3/exchangeInfo, that indicates if One-Triggers-the-Other (OTO) orders are supported on that symbol.

WebSocket API

  • The orderList.place request is now deprecated on the WebSocket API. You should now use the new orderList.place.oco request instead. Note that this new request uses different parameters.
  • orderList.place has been removed from the WebSocket API documentation for SPOT Testnet.
  • otoAllowed will now appear on exchangeInfo, that indicates if One-Triggers-the-Other (OTO) orders are supported on that symbol.

SBE

  • A new schema 2:0 spot_2_0.xml has been released for SPOT Testnet. The current schema, 1:0 spot_1_0.xml, will thus be deprecated and retired from the Testnet APIs in 6 months as per our schema deprecation policy.
  • When using schema 1:0 on REST API or WebSocket API, group "permissions" in message "ExchangeInfoResponse" will always be empty. Upgrade to schema 2:0 to find permission information in group "permissionSets". See General changes above for more details.
  • Responses for deprecated OCO requests are supported by both schema 1:0 and 2:0

2024-03-13​

General changes:

  • GET /api/v3/account has a new optional parameter omitZeroBalances, allowing to hide all zero balances
  • account.status has a new optional parameter omitZeroBalances allowing to hide all zero balances.

User Data Stream:

  • New event listenKeyExpired is now emitted when a listenKey expires.